Archive for the ‘Winches’ Category

If you’re a serious Jeep off-roader you will know how important having a winch can be. If you or one of your off-road companions should happen to become stuck, you will wish someone had a winch on their vehicle. A winch can help you get of some sticky situations such as being stuck in the mud, or encountering some water that was deeper than it first appeared. A winch can be a life saver when your off-roading. After having to use it one time, you will be glad that you spent the extra money and time installing a winch on your vehicle.

If you choose to install the winch yourself, there are some things that need to be taken care of before and while you are installing your new winch. Below are instructions for installing your winch.
• First you will want to disconnect the negative cable from the battery and then remove the positive cable. This will insure that there is no juice running through your vehicle while you are working.
• The next step is to attach the fairlead to the front of the winch plate using two fairlead bolts with a torque wrench.
• Next attach the winch to the winch plate using four winch plate bolts. The bolts should be long enough to go from the back into the feet of the winch.
• Now you will need to unbolt the four bumper bolts located on your Jeep’s bumper that are used to hold the tow hooks.
• In this step you will require the help of a friend to hold the winch in place on the bumper directly over the four bumper bolt holes.
• While your friend is holding the winch in place, replace the bumper bolts through the holes located on the winch. This will attach the winch to your bumper.
• Now it’s time to wire it for power. Pull the black and red power cables located on the winch through the front grill of your jeep. You will have to run the cables past the radiator on the passenger side of the Jeep.
• Attach the red power cable from the winch onto the red battery post and tighten. Then do the same with the black power cable, attaching it to the black battery post in the same way.
• Once you’ve followed all of the steps you can now reconnect the battery cables and then turn on your Jeep to test your new winch.

If you have followed all of the steps, your winch should be up and ready to use.

Every day we help Jeep Enthusiasts across the United States find the Jeep Parts and Accessories they need. With a selection of over 10,000 and climbing Jeep products, you are sure to find just the item you are looking for.
1192 East Draper Parkway
Suite 302
Draper, UT. 84020
URL: http://www.xtremeterrain.com/
Toll Free: 1-888-358-JEEP
Local: 1-801-649-4240
Customer service email:

Connect with us!
XtremeTerrain Facebook Fan Page
XtremeTerrain Twitter

Read Full Post »