Feeds:
Posts
Comments

Posts Tagged ‘Jeep Lighting Kits/Bars’

Textured Black Windshield Frame Light Bar for 2007-Up Wrangler JK by Rugged Ridge

Textured Black Windshield Frame Light Bar for 2007-Up Wrangler JK by Rugged Ridge

Installing lights on the windshield of your Jeep will provide you with additional lighting that will not be exposed to trail debris.  Jeep Wranglers are equipped with a folding windshield which allows for a lighting system to be easily installed using a simple bracket system which can be bolted using the factory hinges as secure mounting points.  Adding lights to the windshield of your Jeep will provide you with an extra sense of safety while driving on trails, they can help you spot debris in the road and large rocks that you may have missed before.

The process of adding lights to your windshield brackets is not extremely difficult.  The first thing you should do is park your Jeep in a level spot, this will make working easier.  Next you need to disconnect the negative battery terminal.  After you have securely parked your parked and disconnected the negative terminal your next step will be to install the windshield light brackets.  You will need to remove two bolts that are located on the factory bracket in order to place the light bracket over it.

Next you install the lights onto the brackets; the brackets are equipped with large holes on the top that are capable of holding different sizes of lighting systems.  The lighting system that you purchased should come with mounting hardware; this hardware should include a large locking nut or large nut with a locking washer.  When you’re ready you can insert the light through the top of the bracket and tighten the nut from under the light.

After you have secured the lights to the windshield using the bolts and nuts you will need to connect the wiring harness to the lights and place the wiring harness for each light behind the front hood by the windshield.  Once you have secured the wires for the lights you will now need to connect them with the fuse block supplied in the wiring kit that came with your lights.  You will need to run the wiring from the fuse block to the battery where you will connect for power.  Once your wires are at the battery you will now need to connect the ground wire, after you have done that you will now need to take the power wires and run them into the cabin of your Jeep where they will be connected to an on-off switch.  Now that you have properly wired your lights you are ready to hit the trails.

Every day we help Jeep Enthusiasts across the United States find the Jeep Parts and Accessories they need. With a selection of over 10,000 and climbing Jeep products, you are sure to find just the item you are looking for.
ExtremeTerrain

7 Lee Blvd.
Malvern, PA 19355

Telephone
1 (800) 988-4605

URL:  http://www.extremeterrain.com/
Email:  service@XtremeTerrain.com
Customer service email: service@XtremeTerrain.com

Connect with us!
ExtremeTerrain.com FanPage

ExtremeTerrain Twitter

Advertisements

Read Full Post »

Front Bumper Auxiliary Light Bar For 97-06 Jeep Wrangler TJ & Unlimited by Olympic


Lighting kits/bars for Jeeps are wonderful additions if you have to do a lot of night driving or if you often drive off road. Even when it’s bright and sunny, when you go off roading there are often areas you drive through that are a lot darker than you would like. Lighting kits/bars are excellent ways to make it easier to see what you’re doing and make your drive a lot safer.

There are several kinds of lighting kits/bars that you can choose from. One type has bars that hug the contours of your windshield, giving your Jeep a nice look without making it difficult for you to use a soft or hard top. These kinds of light bars fit over the top of your Jeep and are often made of textured black or stainless tubing that has been polished. The bars attach without drilling, so no damage is done to your Jeep. Lights are sold separately unless you purchase a kit, then everything is included. Another version of the top light bar is very heavy duty and will install in a matter of minutes. These types are perfect if you plan on lighting your way at night, and have room for four lights. Again, the lights are separate unless part of a kit.

You don’t have to install lighting kits/bars over the top of your Jeep. You can also install them on the bumper. This allows you to add extra lighting to the bumper that your Jeep came with from the factory. It simply bolts to the mounting holes that already exist, saving you from having to do any drilling, cutting, or taking off the bumper. You can simply use a few hand tools and add up to three lights to the front of your Jeep.

Jeep light kits/bars are great ways of adding more light to your Jeep, and you don’t have to spend a whole lot of money to get a great bar or kit if you’re on a budget. Many kits will allow you to add lights in places other lights won’t fit. These kits are great for giving you focused beams of light or super bright light.

Every day we help Jeep Enthusiasts across the United States find the Jeep Parts and Accessories they need. With a selection of over 10,000 and climbing Jeep products, you are sure to find just the item you are looking for.
XtremeTerrain
1192 East Draper Parkway
Suite 302
Draper, UT. 84020
URL: http://www.xtremeterrain.com/
Telephone
Toll Free: 1-888-358-JEEP
Local: 1-801-649-4240
Email
service@XtremeTerrain.com
Customer service email:
service@XtremeTerrain.com

Connect with us!
XtremeTerrain Facebook Fan Page
XtremeTerrain Twitter

Read Full Post »